PACK-level deployment
PACK-level deployment
ES-01 Battery Pack-Level Fire Detection System
Battery Pack Fire Detector · Bosean
Composite fire detection device for battery PACK-level installation. Bosean describes integrated CO, smoke and temperature monitoring, high-frequency sampling and multi-level warning logic.
- PACK-level deployment
- CO, smoke and temperature
- High-frequency sampling
- Multi-level warning logic
- Power, fault and alarm LEDs
Detection Gas / ParametersCO, smoke, temperature
Product TypeBattery Pack Fire Detector
BrandBosean
The installed sensor package, measurement ranges and available options depend on the ordered configuration. Confirm the final specification before application.
ES-01 · Battery Pack Fire Detector
ES-01 Battery Pack-Level Fire Detection System for Battery Energy Storage
Composite fire detection device for battery PACK-level installation. Bosean describes integrated CO, smoke and temperature monitoring, high-frequency sampling and multi-level warning logic.
The model should be selected against the target measurement, operating environment and required system interface. Where a product family offers multiple sensors or hardware versions, the ordered configuration—not the full option list—defines the instrument supplied.
01 / Product Highlights
Key Features
Product functions and configuration points relevant to equipment selection.
CO, smoke and temperature
CO, smoke and temperature
High-frequency sampling
High-frequency sampling
Multi-level warning logic
Multi-level warning logic
Power, fault and alarm LEDs
Power, fault and alarm LEDs
02 / Engineering Data
Technical Specifications
Values below are limited to information identified in supplier material. Confirm the current datasheet for the exact model revision and ordered configuration.
| Parameter | Specification |
|---|---|
| Reference | Confirm voltage, communication, alarm thresholds, number per pack and BMS/fire-system compatibility |
Sensor options, measuring ranges, alarm thresholds, interfaces and approvals may vary by configuration. Confirm the final specification before installation or use in a regulated environment.
03 / Measurement Configuration
Detection Gas & Measurement Parameters
The parameters below identify the product’s intended measurement scope. The actual installed channels and ranges must be confirmed for the ordered unit.
| Gas / Parameter | Configuration |
|---|---|
| CO | Confirm from the ordered sensor configuration |
| smoke | Confirm from the ordered sensor configuration |
| temperature | Confirm from the ordered sensor configuration |
04 / Use Environments
Typical Applications
Application suitability depends on the measured hazard, instrument configuration and site requirements.
Battery Energy Storage
ES-01 Battery Pack-Level Fire Detection System can be specified for this environment when its sensor configuration and operating limits match the site requirements.
Battery Pack Safety
ES-01 Battery Pack-Level Fire Detection System can be specified for this environment when its sensor configuration and operating limits match the site requirements.
05 / Equipment Selection
How to Specify the ES-01
Define the measurement task before choosing a product configuration.
- Target measurement: Confirm the gas or environmental parameter and whether more than one channel is required.
- Range and performance: Match the measuring range, resolution, accuracy and response requirements to the application.
- Installation environment: Review temperature, humidity, dust, water exposure, mounting and hazardous-area requirements.
- System integration: Confirm power, analog or digital outputs, communication protocol and alarm interfaces.
- Maintenance: Check calibration, bump-test, sensor replacement and service requirements in the current manual.
06 / Common Questions
Frequently Asked Questions
What does the ES-01 measure?
The product information identifies CO, smoke, temperature. The exact channels and ranges depend on the ordered configuration and should be confirmed against the current datasheet.
Which version of the ES-01 should I select?
Start with the target gas or parameter, required measuring range, installation environment and output requirements. Confirm the final sensor and hardware configuration with the supplier.
Are all listed options included in one standard unit?
No. Options shown for a model family should not be assumed to be installed simultaneously. The quotation and datasheet should identify the exact supplied configuration.
What documents should be checked before installation?
Review the current datasheet, user manual, wiring or mounting information and any certificate required for the intended site.