Three IR sensors plus one UV channel
Three IR sensors plus one UV channel
S600-ExIR3-UV Triple-IR Single-UV Flame Detector
Triple-IR / Single-UV Flame Detector · Otywell
Point flame detector using three infrared sensors and one UV channel. The manufacturer describes optical filtering and flame-flicker logic to evaluate hydrocarbon fire signatures and reduce background interference.
- Three IR sensors plus one UV channel
- Optical filtering
- Flame-flicker signal processing
- Automatic sensitivity adjustment described
- Flameproof type in product title
Detection Gas / ParametersFlame / hydrocarbon fire detection
Product TypeTriple-IR / Single-UV Flame Detector
BrandOtywell
The installed sensor package, measurement ranges and available options depend on the ordered configuration. Confirm the final specification before application.
S600-ExIR3-UV · Triple-IR / Single-UV Flame Detector
S600-ExIR3-UV Triple-IR Single-UV Flame Detector for Oil & Gas
Point flame detector using three infrared sensors and one UV channel. The manufacturer describes optical filtering and flame-flicker logic to evaluate hydrocarbon fire signatures and reduce background interference.
The model should be selected against the target measurement, operating environment and required system interface. Where a product family offers multiple sensors or hardware versions, the ordered configuration—not the full option list—defines the instrument supplied.
01 / Product Highlights
Key Features
Product functions and configuration points relevant to equipment selection.
Optical filtering
Optical filtering
Flame-flicker signal processing
Flame-flicker signal processing
Automatic sensitivity adjustment described
Automatic sensitivity adjustment described
Flameproof type in product title
Flameproof type in product title
02 / Engineering Data
Technical Specifications
Values below are limited to information identified in supplier material. Confirm the current datasheet for the exact model revision and ordered configuration.
| Parameter | Specification |
|---|---|
| Reference | Main IR channel responds to hydrocarbon combustion CO2 emission around 4.4 μm |
| Reference | exact field of view, distance and Ex certificate require verification |
Sensor options, measuring ranges, alarm thresholds, interfaces and approvals may vary by configuration. Confirm the final specification before installation or use in a regulated environment.
03 / Measurement Configuration
Detection Gas & Measurement Parameters
The parameters below identify the product’s intended measurement scope. The actual installed channels and ranges must be confirmed for the ordered unit.
| Gas / Parameter | Configuration |
|---|---|
| Flame / hydrocarbon fire detection | Confirm from the ordered sensor configuration |
04 / Use Environments
Typical Applications
Application suitability depends on the measured hazard, instrument configuration and site requirements.
Oil & Gas
S600-ExIR3-UV Triple-IR Single-UV Flame Detector can be specified for this environment when its sensor configuration and operating limits match the site requirements.
Petrochemical
S600-ExIR3-UV Triple-IR Single-UV Flame Detector can be specified for this environment when its sensor configuration and operating limits match the site requirements.
Industrial Fire Safety
S600-ExIR3-UV Triple-IR Single-UV Flame Detector can be specified for this environment when its sensor configuration and operating limits match the site requirements.
05 / Equipment Selection
How to Specify the S600-ExIR3-UV
Define the measurement task before choosing a product configuration.
- Target measurement: Confirm the gas or environmental parameter and whether more than one channel is required.
- Range and performance: Match the measuring range, resolution, accuracy and response requirements to the application.
- Installation environment: Review temperature, humidity, dust, water exposure, mounting and hazardous-area requirements.
- System integration: Confirm power, analog or digital outputs, communication protocol and alarm interfaces.
- Maintenance: Check calibration, bump-test, sensor replacement and service requirements in the current manual.
06 / Common Questions
Frequently Asked Questions
What does the S600-ExIR3-UV measure?
The product information identifies Flame / hydrocarbon fire detection. The exact channels and ranges depend on the ordered configuration and should be confirmed against the current datasheet.
Which version of the S600-ExIR3-UV should I select?
Start with the target gas or parameter, required measuring range, installation environment and output requirements. Confirm the final sensor and hardware configuration with the supplier.
Are all listed options included in one standard unit?
No. Options shown for a model family should not be assumed to be installed simultaneously. The quotation and datasheet should identify the exact supplied configuration.
What documents should be checked before installation?
Review the current datasheet, user manual, wiring or mounting information and any certificate required for the intended site.