Single-gas configuration
Single-gas configuration
G10S Portable Single-Gas Detector
Portable Single-Gas Detector · Otywell
Portable single-gas detection alarm for continuous monitoring of a selected gas hazard. The manufacturer describes natural-diffusion sensing, an LCD and sensor options for combustible, toxic-gas or oxygen measurement. The installed sensor defines the gas and range.
- Single-gas configuration
- Natural-diffusion sampling
- LCD display
- Sound, light and vibration alarm functions
- Sensor choices by target gas
- Compact portable housing
Detection Gas / ParametersLEL, O2, H2S, CO, NH3, Cl2
Product TypePortable Single-Gas Detector
BrandOtywell
The installed sensor package, measurement ranges and available options depend on the ordered configuration. Confirm the final specification before application.
G10S · Portable Single-Gas Detector
G10S Portable Single-Gas Detector for Industrial Safety
Portable single-gas detection alarm for continuous monitoring of a selected gas hazard. The manufacturer describes natural-diffusion sensing, an LCD and sensor options for combustible, toxic-gas or oxygen measurement. The installed sensor defines the gas and range.
The model should be selected against the target measurement, operating environment and required system interface. Where a product family offers multiple sensors or hardware versions, the ordered configuration—not the full option list—defines the instrument supplied.
01 / Product Highlights
Key Features
Product functions and configuration points relevant to equipment selection.
Natural-diffusion sampling
Natural-diffusion sampling
LCD display
LCD display
Sound, light and vibration alarm functions
Sound, light and vibration alarm functions
Sensor choices by target gas
Sensor choices by target gas
Compact portable housing
Compact portable housing
02 / Engineering Data
Technical Specifications
Values below are limited to information identified in supplier material. Confirm the current datasheet for the exact model revision and ordered configuration.
| Parameter | Specification |
|---|---|
| Reference | Single-gas configuration |
| Reference | natural diffusion |
| Reference | LCD |
| Reference | T90 <30 s for flammable gases listed |
| Reference | display error ≤±5% FS listed |
| Reference | detection principle and range depend on sensor |
Sensor options, measuring ranges, alarm thresholds, interfaces and approvals may vary by configuration. Confirm the final specification before installation or use in a regulated environment.
03 / Measurement Configuration
Detection Gas & Measurement Parameters
The parameters below identify the product’s intended measurement scope. The actual installed channels and ranges must be confirmed for the ordered unit.
| Gas / Parameter | Configuration |
|---|---|
| LEL | Confirm from the ordered sensor configuration |
| O2 | Confirm from the ordered sensor configuration |
| H2S | Confirm from the ordered sensor configuration |
| CO | Confirm from the ordered sensor configuration |
| NH3 | Confirm from the ordered sensor configuration |
| Cl2 | Confirm from the ordered sensor configuration |
04 / Use Environments
Typical Applications
Application suitability depends on the measured hazard, instrument configuration and site requirements.
Industrial Safety
G10S Portable Single-Gas Detector can be specified for this environment when its sensor configuration and operating limits match the site requirements.
Mining
G10S Portable Single-Gas Detector can be specified for this environment when its sensor configuration and operating limits match the site requirements.
Pipeline Inspection
G10S Portable Single-Gas Detector can be specified for this environment when its sensor configuration and operating limits match the site requirements.
05 / Equipment Selection
How to Specify the G10S
Define the measurement task before choosing a product configuration.
- Target measurement: Confirm the gas or environmental parameter and whether more than one channel is required.
- Range and performance: Match the measuring range, resolution, accuracy and response requirements to the application.
- Installation environment: Review temperature, humidity, dust, water exposure, mounting and hazardous-area requirements.
- System integration: Confirm power, analog or digital outputs, communication protocol and alarm interfaces.
- Maintenance: Check calibration, bump-test, sensor replacement and service requirements in the current manual.
06 / Common Questions
Frequently Asked Questions
What does the G10S measure?
The product information identifies LEL, O2, H2S, CO, NH3, Cl2. The exact channels and ranges depend on the ordered configuration and should be confirmed against the current datasheet.
Which version of the G10S should I select?
Start with the target gas or parameter, required measuring range, installation environment and output requirements. Confirm the final sensor and hardware configuration with the supplier.
Are all listed options included in one standard unit?
No. Options shown for a model family should not be assumed to be installed simultaneously. The quotation and datasheet should identify the exact supplied configuration.
What documents should be checked before installation?
Review the current datasheet, user manual, wiring or mounting information and any certificate required for the intended site.