Flexible metal probe
Flexible metal probe
KP816 Portable Gas Leakage Detector
Portable Gas Leak Detector · Otywell
Single-gas portable leak detector with a flexible metal probe. The manufacturer describes pipeline and fitting leak checks, semiconductor sensing, adjustable alarm point and LCD indication.
- Flexible metal probe
- Large LCD with menu operation
- Semiconductor sensing
- Adjustable alarm point
- Low-voltage warning
- Sensor fault detection and startup self-test
Detection Gas / ParametersFlammable gas; sensor options require confirmation
Product TypePortable Gas Leak Detector
BrandOtywell
The installed sensor package, measurement ranges and available options depend on the ordered configuration. Confirm the final specification before application.
KP816 · Portable Gas Leak Detector
KP816 Portable Gas Leakage Detector for Pipeline Inspection
Single-gas portable leak detector with a flexible metal probe. The manufacturer describes pipeline and fitting leak checks, semiconductor sensing, adjustable alarm point and LCD indication.
The model should be selected against the target measurement, operating environment and required system interface. Where a product family offers multiple sensors or hardware versions, the ordered configuration—not the full option list—defines the instrument supplied.
01 / Product Highlights
Key Features
Product functions and configuration points relevant to equipment selection.
Large LCD with menu operation
Large LCD with menu operation
Semiconductor sensing
Semiconductor sensing
Adjustable alarm point
Adjustable alarm point
Low-voltage warning
Low-voltage warning
Sensor fault detection and startup self-test
Sensor fault detection and startup self-test
02 / Engineering Data
Technical Specifications
Values below are limited to information identified in supplier material. Confirm the current datasheet for the exact model revision and ordered configuration.
| Parameter | Specification |
|---|---|
| Reference | Natural diffusion |
| Reference | semiconductor |
| Reference | 0–100% LEL |
| Reference | 1 ppm / 1% LEL sensitivity |
| Reference | ±3% FS |
| Reference | T90 ≤30 s |
| Reference | 3.7 V 2000 mAh battery |
| Reference | >8 h |
| Reference | Ex ib IIC T4 Gb |
| Reference | 169 × 69 × 30 mm |
| Reference | 300 g |
Sensor options, measuring ranges, alarm thresholds, interfaces and approvals may vary by configuration. Confirm the final specification before installation or use in a regulated environment.
03 / Measurement Configuration
Detection Gas & Measurement Parameters
The parameters below identify the product’s intended measurement scope. The actual installed channels and ranges must be confirmed for the ordered unit.
| Gas / Parameter | Configuration |
|---|---|
| Flammable gas; sensor options require confirmation | Confirm from the ordered sensor configuration |
04 / Use Environments
Typical Applications
Application suitability depends on the measured hazard, instrument configuration and site requirements.
Pipeline Inspection
KP816 Portable Gas Leakage Detector can be specified for this environment when its sensor configuration and operating limits match the site requirements.
Gas Utility Maintenance
KP816 Portable Gas Leakage Detector can be specified for this environment when its sensor configuration and operating limits match the site requirements.
Industrial Safety
KP816 Portable Gas Leakage Detector can be specified for this environment when its sensor configuration and operating limits match the site requirements.
05 / Equipment Selection
How to Specify the KP816
Define the measurement task before choosing a product configuration.
- Target measurement: Confirm the gas or environmental parameter and whether more than one channel is required.
- Range and performance: Match the measuring range, resolution, accuracy and response requirements to the application.
- Installation environment: Review temperature, humidity, dust, water exposure, mounting and hazardous-area requirements.
- System integration: Confirm power, analog or digital outputs, communication protocol and alarm interfaces.
- Maintenance: Check calibration, bump-test, sensor replacement and service requirements in the current manual.
06 / Common Questions
Frequently Asked Questions
What does the KP816 measure?
The product information identifies Flammable gas; sensor options require confirmation. The exact channels and ranges depend on the ordered configuration and should be confirmed against the current datasheet.
Which version of the KP816 should I select?
Start with the target gas or parameter, required measuring range, installation environment and output requirements. Confirm the final sensor and hardware configuration with the supplier.
Are all listed options included in one standard unit?
No. Options shown for a model family should not be assumed to be installed simultaneously. The quotation and datasheet should identify the exact supplied configuration.
What documents should be checked before installation?
Review the current datasheet, user manual, wiring or mounting information and any certificate required for the intended site.