NDIR CO2 sensing described
NDIR CO2 sensing described
DM1210C Mini CO2 Meter
Mini CO2 Monitor · Langder
Mini CO2 meter with temperature and humidity readings. Langder product information describes NDIR sensing for this model family; confirm the exact current DM1210C range and accuracy.
- NDIR CO2 sensing described
- Temperature and humidity
- Compact indoor format
- Ventilation awareness
Detection Gas / ParametersCO2, temperature, humidity
Product TypeMini CO2 Monitor
BrandLangder
The installed sensor package, measurement ranges and available options depend on the ordered configuration. Confirm the final specification before application.
DM1210C · Mini CO2 Monitor
DM1210C Mini CO2 Meter for Residential
Mini CO2 meter with temperature and humidity readings. Langder product information describes NDIR sensing for this model family; confirm the exact current DM1210C range and accuracy.
The model should be selected against the target measurement, operating environment and required system interface. Where a product family offers multiple sensors or hardware versions, the ordered configuration—not the full option list—defines the instrument supplied.
01 / Product Highlights
Key Features
Product functions and configuration points relevant to equipment selection.
Temperature and humidity
Temperature and humidity
Compact indoor format
Compact indoor format
Ventilation awareness
Ventilation awareness
02 / Engineering Data
Technical Specifications
Values below are limited to information identified in supplier material. Confirm the current datasheet for the exact model revision and ordered configuration.
| Parameter | Specification |
|---|---|
| Reference | Confirm CO2 range, accuracy, calibration, display, power and difference from DM336C |
Sensor options, measuring ranges, alarm thresholds, interfaces and approvals may vary by configuration. Confirm the final specification before installation or use in a regulated environment.
03 / Measurement Configuration
Detection Gas & Measurement Parameters
The parameters below identify the product’s intended measurement scope. The actual installed channels and ranges must be confirmed for the ordered unit.
| Gas / Parameter | Configuration |
|---|---|
| CO2 | Confirm from the ordered sensor configuration |
| temperature | Confirm from the ordered sensor configuration |
| humidity | Confirm from the ordered sensor configuration |
04 / Use Environments
Typical Applications
Application suitability depends on the measured hazard, instrument configuration and site requirements.
Residential
DM1210C Mini CO2 Meter can be specified for this environment when its sensor configuration and operating limits match the site requirements.
Offices
DM1210C Mini CO2 Meter can be specified for this environment when its sensor configuration and operating limits match the site requirements.
Classrooms
DM1210C Mini CO2 Meter can be specified for this environment when its sensor configuration and operating limits match the site requirements.
Ventilation Monitoring
DM1210C Mini CO2 Meter can be specified for this environment when its sensor configuration and operating limits match the site requirements.
05 / Equipment Selection
How to Specify the DM1210C
Define the measurement task before choosing a product configuration.
- Target measurement: Confirm the gas or environmental parameter and whether more than one channel is required.
- Range and performance: Match the measuring range, resolution, accuracy and response requirements to the application.
- Installation environment: Review temperature, humidity, dust, water exposure, mounting and hazardous-area requirements.
- System integration: Confirm power, analog or digital outputs, communication protocol and alarm interfaces.
- Maintenance: Check calibration, bump-test, sensor replacement and service requirements in the current manual.
06 / Common Questions
Frequently Asked Questions
What does the DM1210C measure?
The product information identifies CO2, temperature, humidity. The exact channels and ranges depend on the ordered configuration and should be confirmed against the current datasheet.
Which version of the DM1210C should I select?
Start with the target gas or parameter, required measuring range, installation environment and output requirements. Confirm the final sensor and hardware configuration with the supplier.
Are all listed options included in one standard unit?
No. Options shown for a model family should not be assumed to be installed simultaneously. The quotation and datasheet should identify the exact supplied configuration.
What documents should be checked before installation?
Review the current datasheet, user manual, wiring or mounting information and any certificate required for the intended site.