Pollen-monitoring category
Pollen-monitoring category
DM72P Pollen Detector
Pollen Monitor · Langder
Pollen detector candidate from Langder's product category. Confirm what pollen types are detected, whether the instrument counts or classifies particles, and how results are reported.
- Pollen-monitoring category
- Indoor environmental use
- Detection method to verify
- Pollen types to verify
Detection Gas / ParametersPollen; types to confirm
Product TypePollen Monitor
BrandLangder
The installed sensor package, measurement ranges and available options depend on the ordered configuration. Confirm the final specification before application.
DM72P · Pollen Monitor
DM72P Pollen Detector for Residential
Pollen detector candidate from Langder's product category. Confirm what pollen types are detected, whether the instrument counts or classifies particles, and how results are reported.
The model should be selected against the target measurement, operating environment and required system interface. Where a product family offers multiple sensors or hardware versions, the ordered configuration—not the full option list—defines the instrument supplied.
01 / Product Highlights
Key Features
Product functions and configuration points relevant to equipment selection.
Indoor environmental use
Indoor environmental use
Detection method to verify
Detection method to verify
Pollen types to verify
Pollen types to verify
02 / Engineering Data
Technical Specifications
Values below are limited to information identified in supplier material. Confirm the current datasheet for the exact model revision and ordered configuration.
| Parameter | Specification |
|---|---|
| Reference | Do not claim species identification |
| Reference | obtain complete manual and performance specification |
Sensor options, measuring ranges, alarm thresholds, interfaces and approvals may vary by configuration. Confirm the final specification before installation or use in a regulated environment.
03 / Measurement Configuration
Detection Gas & Measurement Parameters
The parameters below identify the product’s intended measurement scope. The actual installed channels and ranges must be confirmed for the ordered unit.
| Gas / Parameter | Configuration |
|---|---|
| Pollen; types to confirm | Confirm from the ordered sensor configuration |
04 / Use Environments
Typical Applications
Application suitability depends on the measured hazard, instrument configuration and site requirements.
Residential
DM72P Pollen Detector can be specified for this environment when its sensor configuration and operating limits match the site requirements.
Indoor Environmental Monitoring
DM72P Pollen Detector can be specified for this environment when its sensor configuration and operating limits match the site requirements.
05 / Equipment Selection
How to Specify the DM72P
Define the measurement task before choosing a product configuration.
- Target measurement: Confirm the gas or environmental parameter and whether more than one channel is required.
- Range and performance: Match the measuring range, resolution, accuracy and response requirements to the application.
- Installation environment: Review temperature, humidity, dust, water exposure, mounting and hazardous-area requirements.
- System integration: Confirm power, analog or digital outputs, communication protocol and alarm interfaces.
- Maintenance: Check calibration, bump-test, sensor replacement and service requirements in the current manual.
06 / Common Questions
Frequently Asked Questions
What does the DM72P measure?
The product information identifies Pollen; types to confirm. The exact channels and ranges depend on the ordered configuration and should be confirmed against the current datasheet.
Which version of the DM72P should I select?
Start with the target gas or parameter, required measuring range, installation environment and output requirements. Confirm the final sensor and hardware configuration with the supplier.
Are all listed options included in one standard unit?
No. Options shown for a model family should not be assumed to be installed simultaneously. The quotation and datasheet should identify the exact supplied configuration.
What documents should be checked before installation?
Review the current datasheet, user manual, wiring or mounting information and any certificate required for the intended site.